KIT-2100 – S Class 3 Mainboard

KIT-2100 is the original replacement kit for the mainboard used in Summa S Class 3 (S3) roll cutters.
It is intended to replace the machine’s main electronics in case of failure or communication issues.

Compatibility

• Summa S Class 3 (S3 roll cutter)
  (Common models: S75 / S120 / S140 / S160)

Kit contents

• 1 × Mainboard KIT-2100 (PCB marking: 395-895 REV.B)

Installation recommendations

Replacement requires qualified technical intervention and may involve configuration, calibrations and firmware update, depending on the machine status.
Professional installation is recommended.

Recommended remote support Click on SUPPORT

• 1 hour (replacement + checks)

• 2 hours (if no backup is available and full setup/calibration is required)